Abacus Laybrook

Helston Vertical Lifting Carers Bed

All beds come as standard with a High Quality Reflex Mattress. Mattress upgrades are available.

This dual Carers bed is ideal for someone looking stay close to their partner. The dual Carers bed has separate motors to profile the bed at the head-end or the foot-end and again separate motors to vertically raise the bed up to 18 inches from the starting position (standard 23 inches) - see below. Our new Carers bed can be raised flat for the carers to wash or turn the patient, or it can be used to help the person stand up from a sitting position on the edge of the middle section of the bed like a riser recliner chair, or it can be raised whilst adjusted at the head and foot-end to get a comfortable high position - to look out of the window, for example.

The single vertical lifting frame can be put into any of our adjustable bed surrounds, so you can choose the bed you like and add the cost of the single vertical lifting frame to the cost of the bed, or choose the combination as shown here.

The minimum starting height can be 20 inches from the floor to top of mattress, the standard starting height is 23 inches.

Description
• 5 part adjustable profiling with integral raise and lower facility
• 4 motors (2 for profiling and 2 for lift)
• Vertical rise up to 18 inches from starting point
• Twin On-Line fittings
• Weight adjuster zone lumber section
• Centre belt
• Load bearing points bolted and sleeved
• Special order

Dual beds have independent controls and independent matttresses. You will generally have a vertical lifting mechanism on one side of a dual bed, so if you are purchasing a 5ft dual bed you will only need one 2ft 6 vertical lifting mechanism.

Double beds have one mattresses, two vertical lifting mechanisms and a special linking cable.

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).

4ft Carers Lifting Bed

The 4ft carers bed is an ideal care bed for someone looking for extra space to turn in. The 4ft Carers bed has separate motors to profile the bed at the head-end or the foot-end and again separate motors to vertically raise the bed up to 18 inches from the starting position (standard 23 inches). Our new Carers bed can be raised flat for the carers to wash or turn the patient, or it can be used to help the person stand up from a sitting position on the edge of the middle section of the bed like a riser recliner chair, or it can be raised whilst adjusted at the head and foot-end to get a comfortable high position - to look out of the window, for example.

The minimum starting height can be 20 inches from the floor to top of mattress, the standard starting height is 23 inches.

The 4ft double vertical lifting frame can be put into any of our adjustable bed surrounds, so choose the bed you like and add the cost of the 4ft double vertical lifting frame to the cost of the bed, or simply choose the combination as shown here.

Description
• 5 part adjustable profiling with integral raise and lower facility
• 4 motors (2 for profiling and 2 for lift)
• Vertical rise up to 18 inches from starting point
• Twin On-Line fittings
• Weight adjuster zone lumber section
• Centre belt
• Load bearing points bolted and sleeved
• Special order

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).

Arena Grab Ring

The Arena grab ring was designed by Laybrook especially for electric adjustable beds. The grab ring is attached to the side of the bed surround, so it remains static when you change position on your bed. This makes it easy to use when getting in and out of bed; helps you turn whilst lying in bed; supports you when standing up from a sitting position on the edge of the bed. With inferior grab rings, when the head section of your bed elevates to the upright position, the grab ring moves with it, and impedes you from getting in and out of the bed.

Description of Arena Grab Ring
• Bottom half of the grab ring is attached to the inside of the bed surround and the top half is attached to the mechism.
• Top half will always be in the same position.
• Can be fitted to most divans, most wooden surrounds and all of our leather beds.

Dimensions
Height of surround from 6" to 18"
To fit surround thickness of 1"

Cost
Arena Grab Ring £140.00
Courier delivery and installation service are available at extra cost.

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).

Thornbury Adjustable Bed

The Thornbury adjustable bed is a divan style luxury upholstered bed that can come with or without drawers and in all sizes - singles, doubles and duals. If you choose to have the drawers, these are strong and solid, quality you can rely on.

This bed comes with a full 5-year warranty and Reflex mattress. Unlike some other companies, we only sell beds made from the best quality materials and as with all our adjustable beds if you are not totally satisfied with your purchase within 7 days, we will fully refund you the cost of the bed.

It is also fully installed by our trained engineers, NOT FLAT PACKED like some.

Colour
The colour of this bed surround is golden.

Sizes
2ft 6, 3ft, 4ft, 4ft 6, 5ft and 6ft
The picture shown is a dual bed.
A double bed has one mattress.
A dual bed has two mattresses (independent movement)

Bed Height
Standard bed height: 22”
Standard bed with drawer in end: 22”
Standard bed with drawers in side: 24”
To alter the height of the bed is an extra £75.00

Altering the length means altering the mattress, mattress cover, mechanism and surround
Please note that if you change the specification of the bed it will be a special order (non stock item) and will take up to one week longer to make and deliver.

Special Offer Prices range from £655 to £1495 depending on size, and include delivery and set up by our own trained staff.

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).

Wheelchair Access Chair

This powered riser recliner chair has been designed specifically for easy transfer from a wheelchair.

One armrest lifts up vertically out of the way, so that the user can transfer sideways from their wheelchair into the recliner.

It is available in a range of sizes

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).

Made-To-Measure Chairs

Let us come and measure you to make sure your chair fits you!

This service is for bespoke chairs only.

• Choose your back style; Waterfall, Button, Split or T Back
• Choose your mechanism; Single Motor, Dual Motor or Zero
   Gravity
• Choose your arm style; Scroll or Knuckle
• Choose your fabric colour; 100s to choose from

Prices

The prices shown are very competitive for the bespoke market. Why have someone come to your house without knowing the prices up front? Some other companies do not tell you the price until they come around and then you get a shock when they do! They can sometimes be twice as much as we charge. These are fair prices for great products.

Bespoke chairs are £1595 in any fabric material (up to 18 stone)
Larger chairs up to 25 stone £1995
Larger chairs up to 35 stone £2995
Leather is £295 extra

For more information, click here to visit Abacus Laybrook's website (it will open in a new window).