RampsAny change in level can prevent independent access in a wheelchair or scooter: there is a wide choice of wheelchair ramps available to solve this problem wherever it occurs.
A neat modular ramp
system, right, uses polyurethane tiles which interlock together
to form a tough but flexible semi-permanent solution. There are six kits
available, containing sets of pre-assembled ramps, which can be used
over and over again, to overcome obstacles up to a height of 15cm and
a width of 75cm.
These versatile ramp kits can be used to enter and leave buildings; move through doorways within the home; overcome steps; move easily into conservatories or from the patio to the garden.
The tiles have excellent drainage capability, keeping the surface dry, and will not fade in the sun. They can be safely placed against damp courses, airbricks and drainage grates and, because they are semi-permanent, they have no impact on protected buildings.
Portable wheelchair ramps can be moved quickly to wherever they
are needed - to get in and out of a vehicle, for example, or up or down
an occasional step.
The ramp on the left is lightweight fibreglass and comes in lengths from 2' to 7'. A very competitively priced alternative to a permanent ramp structure for providing access, this type of ramp can be used by three wheeled scooters, as well as wheelchairs and four wheeled scooters.
These
ramps (right) are telescopic, closing down when not in use.
Designed to be particularly easy to carry and store, each track is separate, and folds down to about a third of its maximum extended length. For safety, the ramps have a non-slip surface, and a locking mechanism to keep them extended.
Because of the design, they can only be used by four wheeled mobility vehicles and wheelchairs.
In
the house, a threshold ramp is a quick and convenient way to
bridge small variations in floor level.
Ramps such as these can make quite a bit of difference to getting around in a chair or scooter. There are ramps available to bridge a slight change in floor level (left) or a ridge such as a door sill, on an otherwise even floor (right).
A
more permanent structure, such as the fixed wheelchair ramp shown on the left,
makes sense wherever regular wheelchair access is required.
With a non-slip surface and easy grip handrails, it is equally suitable for ambulant users with reduced mobility.
For fixed concrete ramps, Building Regulations would generally suggest a gradient of 1 in 12 (eg: a 3" height would require a 36" ramp).
However, this is a guideline, and not a legal requirement. If space permits, this is the ideal gradient, but often the height that needs to be bridged is too great to allow such a length, particularly on narrow footpaths etc.
Where only occasional use of a portable ramp is required, for powered scooters / electric wheelchairs (or a manual wheelchair with assistance), a gradient of 1 in 6 is adequate. (eg: a 6" step requires a 36" ramp).
Quick links to other Independent Living Product sections below:
Ability Store
AKW Ltd
Bentley Fielden
Easiaccess
EPC Wheelchairs
Manage at Home
Ability Store
Able2
Bentley Fielden
Easiaccess
Manage at Home
Ability Store
Able2
Bentley Fielden
Easiaccess
Manage at Home